SDCM3 Readout electronics
The SDCM3 electronics is a versatile low cost, one-board solution for certain linear sensors and Hamamatsu micro spectrometers. It can be extended to a complete portable Bluetooth-device, using its Piggy-back board.
Supported sensors
-
S11639, S13496x, S8378 (CMOS)
-
G11620 (InGaAs)
-
C12880MA (Hamamatsu micro spectrometer)
Specifications
Electrical parameters
-
Power Supply via USB or 5 V external
-
Analog-Digital-Conversion: 16 bit, up to 5 MS/s* with programmable gain and offset
-
Trigger input and output, TTL compatible
-
Shutter/Lamp control output, firmware configurable
-
Flashlamp control with programmable length and interval timing
-
Stabilized 5 V output
-
6 GPIO-Pins, 1 analog input (10 Bit)*, occupied by add-on board
Interfaces
-
USB-HighSpeed (3 Mbit/s, via virtual COM-Port)*
-
LV-TTL-UART (3 MBaud, 8N1)*
-
SPI (20 Mbit/s, Master/Slave)*
Firmware
-
Dark counts, reference counts, transmission, absorbance, (pixelwise or in wavelength steps with pixel wavelength fit up to 4th order)
-
Readout configuration: averaging, oversampling, offset, gain, pixelrange, pixelbinning…
-
SCPI like control syntax, similar on all JETI electronics
-
Windows DLLs
Mechanical dimensions
-
36 x 53 x 15 mm3
-
Flexible PCB version for remote connection to S11639 available on request
Features on Piggy-back board
-
Bluetooth 2.1 Class
-
10/100 Mbit Ethernet
-
Micro-SD card
-
Single-cell LiPo battery support
-
7-28 V external power supply
-
LED/Laser PWM output
-
Touch LC-Display on request
*maximum theoretical speed, practical values are application specific
Department: ADVANCED TECHNOLOGY & DEV DEPT (ATDEV)
Brand: JETI Technische Instrumente GmbH, Germany
Model Num: SDCM3 readout electronics
